Harley Davidson Heated Grips Fuse Location

I have checked all the connections and fuses and cannot find a problem.

Harley davidson heated grips fuse location. If you follow the rudder hose that exits the rear right side of your oil tank it leads to the bottom of the frame under this is the oil plug. Position the left side heated grip 4 so the larger diameter portion of the flange 5 is at the bottom. I guess the same fuse coverlabel is used on both models.

Checked fuse and fuse is ok. I get battery voltage everywhere I check. If you have a cigarette lighter I would say seeing a 15 amp is correct.

I have had my Harley heated grips on my 2014 Street Glide Special for about 4 12 years now. Splice the black hand grip wire to the black wires in the Electrical Connection Harness. Thread the left-side heated grip wire harness all the way through and out the center of the handlebar.

If no power to the back of the lights then the problem exists in your lighting switches. These thermostatically controlled grips feature variable heat settings controlled with a military grade resistor and use automatic temperature monitoring to adjust to ambient temperatures. Lets take a look at where they are and what you ca.

Posted on Jul 29 2010. The connector at the end of the wire harness on the hand gripsleeve must extend past the left end of the handlebar. On some models see attachment the circuit is used and a 15 amp fuse is inserted.

You say there is power at the fuse. They have worked great thus far and are still technically workin. NOTE Make sure that the handlebar surface is smooth dry and thor-oughly cleaned of all dirt.